I have completed the pendant I demo'ed and thought I would show you the finishing stages.
First I checked over the back and sides of the bezel. Even 10 days after the show I was able to clean this up. I gently rubbed with a baby wipe until the dried Powertex was soft then gently scraped with an old bank card then wiped clean.
I checked the piece all over to see if there were any sharp edges, this is essential so that it is comfortable to wear. I gently rubbed sharp areas with an emery board.
Next I added a layer of Powertex red ochre pigment blended with some Powertex Easy Varnish colouring most of the piece.
Then I added a tiny bit of Powertex white pigment to the red ochre and dry brushed to add highlights. I then cleaned my brush before adding even fewer highlights with plain white pigment.
Finally I added one of the cords.
And that's it finished and ready to wear!
Share your Powertex Jewellery with us on Powertex Addicts or on my Facebook page
See you next time....
Fi
